Publikationen

Pubikationen unter Beteiligung von Mitarbeiterinnen und Mitarbeitern des IGM seit 2001

IGM Publikationen

  1. 2019

    1. C. Reinert-Weiss, D. Duhme, and N. Fruehauf, “Augmented Reality Using High Resolution Adaptive Headlights,” in IEEE-Konferenz ICCE 2019, Las Vegas USA, 11.-13.01.2019, 2019.
  2. 2018

    1. J. Schmidt et al., “Proof of concept for an optogalvanic gas sensor for NO based on Rydberg excitations,” Applied Physics Letters, vol. 113, no. 1, p. 011113, 2018.
    2. J. Schmidt et al., “A transimpedance amplifier based on an LTPS process operated in alkali vapor for the measurement of an ionization current,” Quantum Technologies 2018, 2018.
    3. S. A. A. Nusayer, P. Schalberger, H. Baur, C. Jurgschat, and N. Fruehauf, “Process Optimization for TFT Integrated MEMS Shutter Display,” in IDW’18, Nagoya/Japan, Proceedings of Int. Display Workshop, S. 1356-1359, 2018.
    4. P. Schalberger, S. A. A. Nusayer, A. Giraldo, B. Kundu, D. Pires, and R. Scholl, “Low Temperature Manufacturing Processes for Flexible Liquid Crystal Cells,” Proceedings of the SID-ME spring meeting 2018, Jena, Germany, 2018.
    5. P. Gaucci, N. Fruehauf, A. Ilchmann, B. Polzinger, W. Eberhardt, and H. Kueck, “Organic thin film transistors on back molded plastic foil,” IOP Publishing Ltd, Flexible and Printed Electronics, Vol. 3, No. 1, 2018.
    6. S. A. A. Nusayer, P. Schalberger, H. Baur, and N. Fruehauf, “TFT Integrated Microelectromechanical Shutter for Display Application,” SID Display Week 2018, Los Angeles/USA, Digest of Technical Papers, Session 39-4, Seiten 498-501, 2018.
    7. N. Fruehauf, N. Kammoun, S. A. A. Nusayer, C. Reinert-Weiss, and P. Schalberger, “Large Area Microelectronics - Technology and Trends,” AM-FPD’18 in Kyoto, Japan, The Proceedings of AM-FPD’18, 1-1, 2018.
    8. J. Schmidt et al., “Proof of concept for an optogalvanic gas sensor for NO based on Rydberg excitations,” Applied Physics Letters (Vol.113, Issue 1), 2018.
    9. N. Kammoun, Y. Krieg, G. W. Ngaleu, R. Anselmann, G. Renner, and N. Fruehauf, “Manufacturing and Encapsulation Process of Bottom Gate Bottom Contact Thin-Film Transistors with a Printed Oxide Semiconductor,” SID Display Week 2018, Los Angeles/USA, Digest of Technical Papers, Session 64-4, pages 850-853, 2018.
    10. C. Reinert-Weiss and D. Duhme, “High-Resolution LCD Headlamps for Intelligent Lighting,” SID magazine “Information Display” 1/18, Vol. 34, No. 1, pages 16-20, 2018.
  3. 2017

    1. J. Schmidt et al., “A transimpedance amplifier based on an LTPS process operated in alkali vapor,” in 21st Int. Workshop Active-Matrix Flatpanel Displays and Devices (AM-FPD), 2017, p. 296.
    2. N. Kammoun, C. Renninger, and N. Fruehauf, “Chapter contribution ‘Materials for the Manufacturing of an Inkjet Printed Touch Sensor’; in chapter 28, p. 287-297 of the book: ‘Semiconductor Manufacturing Handbook (2nd edition)’; by Hwaiyu Geng,” McGraw-Hill Education, 2nd Edition, 525 Pages, 20.09.2017, ISBN: 978-1-259-58769-6, MHID 1-259-58769-X, 2017.
    3. S. Schimpf, H. Baur, N. Fruehauf, and et. al, “Dickson Charge Pumps Made of Indium-Gallium-Zinc-Oxide Thin-Film Transistors on Foil-Substrates,” SID 2017 Digest of Technical Papers P-135, 2017.
    4. C. Reinert-Weiss, H. Baur, S. A. A. Nusayer, and N. Fruehauf, “Development of Active Matrix LCD for Use in High Resolution Adaptive Headlights,” SID Display Week 2017, Los Angeles, USA, pages 696-699, 2017.
    5. J. Schmidt et al., “A transimpedance amplifier based on a LTPS process operated in alkali vapor,” AM-FPD 2017, Proceedings No. 7-3, p. 296-298, Kyoto, Japan, 2017.
    6. S. Schimpf, H. Baur, and N. F. et. al, “Dickson Charge Pumps Made of Indium-Gallium-Zinc-Oxide Thin-Film Transistors on Foil-Substrates,” SID 2017 Digest of Technical Papers P-135, pages 1765-1768, 2017.
    7. S. Hoehla and N. Fruehauf, “Chapter contribution ‘Ultra-Thin Glass for Displays, Lighting and Touch Sensors’ in Part III, Chapter8 of the book ‘Flexible Glass: Enabling Thin, Lightweight, and Flexible Electronics’ by Sean M. Garner,” Wiley, 378 pages, August 2017, ISBN: 978-1-118-94636-7, 2017.
  4. 2016

    1. P. Schalberger, S. A. A. Nusayer, and C. Raichle, “Parallel Fabrication for Integration of Electronic and Microelectromechanical Systems,” Display Week 2016 Digest of Technical Papers, Session 54-1, pages 731-734, San Francisco, USA, 2016.
    2. "Mamoru Furuta", "Yvonne Krieg", "Gengo Tatsuoka", "S G Mehadi Aman", "Yuya Hirota", and "Norbert Fruehauf", “Low-temperature (150 oC) Processed Self-aligned InGaZnO Hybrid Thin-film Transistor with an Organic Gate Insulator,” IDW/AD ’16, Fukuoka, Japan, 2016.
    3. N. Kammoun, C. Renninger, and N. Frühauf, “Investigation of a transparent electrode ink for the manufacturing of an inkjetprinted touch sensor on glass substrate,” FLEX2016, Monterey California, 2016.
  5. 2015

    1. M. Strecker, J. Brill, S. Köhler, R. T. Weitz, and N. Fruehauf, “Understanding organic thin-film transistor fabrication based on application-relevant deposition and patterning techniques,” Phys. Status Solidi A (2015) DOI: 10.1002/pssa.201431881, 2015.
    2. J. Remmele, D. E. Shen, T. Mustonen, and N. Fruehauf, “Segmented Electrochromic Display Demonstrator Showing Long-Term Switching Stability,” Proceedings: EuroDisplay 2015, Paper No S9.2, 2015.
    3. J. Remmele, E. Shen, T. Mustonen, and N. Fruehauf, “High Performance and Long-Term Stability in Ambiently Fabricated Segmented Solid-State Polymer Electrochromic Displays,” ACS Appl. Mater. Interfaces, 2015, 7 (22), pp 12001–12008, 2015.
  6. 2014

    1. S. G. A. Mehadi, M. Herrmann, P. Schalberger, and N. Frühauf, “Gate Dielectric for Low Temperature IGZO TFT Fabrication,” Electronic Displays Conference, Nuremberg, Germany, 2014.
    2. P. Gaucci, N. Fruehauf, A. Ilchmann, B. Polzinger, W. Eberhardt, and H. Kück, “Flexible Electronics on Back Molded Plastic Foils,” Digest IDW’14, Paper FLX4-3, p. 1438-1441, 2014.
    3. R. Daschner, H. Kübler, R. Löw, H. Baur, N. Frühauf, and T. Pfau, “Triple stack glass-to-glass anodic bonding for optogalvanic spectroscopy cells with electrical feedthroughs,” Applied Physics Letters 105, 041107 (2014), 2014.
    4. M. Herrmann and N. Fruehauf, “Oxide Semiconductor Thin-Film Transistors Using Oxygen Barriers and a Wet-Chemical Back-Channel Etch Step,” Proceedings of the SID 2014, Paper Number 33.4, 2014.
    5. M. Strecker, J. Brill, N. Frühauf, D. Gavranic, J. Remmele, and R. T. Weitz, “Encapsulation of printed organic thin-film transistors using a photo-patternable resist based on orthogonal solvents,” Proceedings of the 2014 Flexible & Printed Electronics Conference, Session 7, TFTs, 2014.
    6. W. Haase, M. Husser, W. Sobek, E. Kurz, L. Rau, and N. Frühauf, “Liquid Crystal Based Glazing System for the Control of Light and Energy Flux into Buildings,” B. Weller, S. Tasche (Editor): Glasbau 2014, 1st Edition. Ernst & Sohn GmbH & Co. KG. 2014, 2014.
    7. N. Fruehauf, D. Benzel, and M. Strecker, “Technologies for Fully Integrated Printed Displays,” Digest IDW’14, Paper FLX3-2, p. 1421-1424, 2014.
  7. 2013

    1. N. Fruehauf and B. Diehm, “Realization of Equivalent High-Order Optical Interference Filters Under Boundary Conditions,” Technical Digest of OIC 2013, 16 - 21 June 2013, Whistler, BC, Canada, pages 1-3, 2013.
    2. S. Hoehla, A. Henzen, and N. Fruehauf, “Development of Electro-Osmotic Color E-Paper,” Proceedings of the SID 2013, pages 119-122 (May 2013), 2013.
  8. 2012

    1. P. Schalberger, M. Herrmann, S. Hoehla, A. Vielwock, and N. Frühauf, “A Current Feedback AMOLED Display Based on Top Gate Amorphous Silicon TFTs,” Proceedings of the SID Symposium, p. 1065-1068, 2012.
    2. B. Diehm and N. Fruehauf, “Synthesis of optical thin film filters under boundary conditions,” Proceedings of SPIE 8429, 84290Z (2012), 2012.
    3. M. Nothaft, S. Höhla, F. Jelezko, N. Frühauf, J. Pflaum, and J. Wrachtrup, “Electrically driven photon antibunching from a single molecule at room temperature,” Nature Communications Volume 3, Page 628, 2012.
    4. H. Steffen et al., “Active Matrix Color-LCD on 75µm Thick Flexible Glass Susbtrates,” IEEE, Journal of Display Technology (JDT), Vol. 8, No. 6, Pages 309-316, 2012.
    5. N. Maximilian, H. Steffen, J. Fedor, and et al., “Single molecule electrical excitation,” Physica Status Solidi B-Basic Solid State Physics, 2012.
    6. R. Daschner et al., “Fabrication and characterization of an electrically contacted vapor cell,” arXiv - Atomic Physics - 1204.2391, 2012.
    7. N. Fruehauf, P. Schalberger, M. Herrmann, and A. Vielwock, “Current Mirror and Current Feedback Driving of Active Matrix Organic Light Emitting Displays,” Proceedings of AM-FPD 12, p 277-280, 2012, 2012.
    8. N. Maximilian, H. Steffen, J. Fedor, and et al., “The role of oxygen-induced processes on the emission characteristics of single molecule emitters,” Physica Status Solidi B-Basic Solid State Physics, Vol.: 249, Issue: 4, Pages 661-665, 2012.
  9. 2011

    1. P. Schalberger, M. Herrmann, S. Höhla, and N. Frühauf, “A fully integrated 1-in. AMOLED display using current feedback based on a five-mask LTPS CMOS process,” Journal of the Society for Information Display -- Volume 19, Issue 7, Pages 496-502 (July 2011), 2011.
    2. M. Herrmann, S. Hoehla, N. Fruehauf, D. L. Kim, S. H. Oh, and H. J. Kim, “Comparison of Solution-processed and Sputtered Indium Gallium Zinc Oxide Thin Film Transistors for Display Applications,” EuroDisplay 2011, Bordeaux-Arcachon, France, Session P45, September 2011, 2011.
    3. S. Höhla et al., “Active matrix color LCDs on ultra-thin glass substrates,” Proceedings of Electronic Displays Conference 2011, March 1st-3rd, Nuremberg, 16.2, 2011.
    4. M. Herrmann, P. Schalberger, H. Baur, N. Fruehauf, O. Langguth, and J. Blochwitz-Nimoth, “Encapsulation and Yield Improvement of a High Resolution Polymorphous 3ATI AMOLED Display,” EuroDisplay 2011, Bordeaux-Arcachon, France, Session 14.4, September 2011, 2011.
    5. N. Maximilian, H. Steffen, N. Aurelien, and et al., “Optical Sensing of Current Dynamics in Organic Light-Emitting Devices at the Nanometer Scale,” CHEMPHYSCHEM, Vol. 12, Issue 14, Pages 2590-2595, 2011.
    6. B. Diehm, C. Gulde, and N. Frühauf, “A design method for high order optical thin film filters under boundary conditions,” Warsaw, 2011.
    7. E. Kurz, L. Rau, W. Haase, M. Prskalo, N. Frühauf, and W. Sobek, “Switchable Glazing based on Twisted Nematic Liquid Crystal Cells,” SID-ME Chapter Spring Meeting 2011, Seeheim, 2011.
    8. W. Haase et al., “Switchable Glazing for Architectural Applications based on Liquid Crystal Technology,” Glass Performance Days 2011 Conference Proceedings, 2011.
    9. P. Schalberger, M. Herrmann, and N. Fruehauf, “Current Control in Active Matrix Organic Light Emitting Diode Displays with Current Feedback,” Proceedings of IMID 2011, Pages 33-34, 2011.
    10. E. Kurz, L. Rau, N. Frühauf, W. Haase, M. Prskalo, and W. Sobek, “Cost-efficient manufacturing process of switchable glazing based on twisted nematic LC cells,” Proceedings of SPIE 8114, 811413 (2011), 2011.
  10. 2010

    1. M. Herrmann, P. Schalberger, H. Baur, and N. Fruehauf, “3ATI Display Development as an Application for a Low Mask Count Top Gate Process,” Poster Session: P – PT3 (March 2010), 2010.
    2. A. Schindler, S. Knorr, J. P. Novak, Z. Yaniv, and N. Fruehauf, “High Yield Solution-based Deposition of Carbon Nanotube Thin Film Transistors for Flexible Display Applications,” Asia Display 2010 Digest, pages 265-266 (October 2010), 2010.
    3. M. Herrmann, P. Schalberger, H. Baur, and N. Fruehauf, “A High Resolution Polymorphous 3ATI AMOLED Display Based on a Low Mask Count Top Gate Process,” Digest IDW’10, Paper AMD3-3, pages 619-622 (December 2010), 2010.
    4. N. Fruehauf, M. Herrmann, S. Höhla, P. Schalberger, and A. Schindler, “Innovations in Active Matrix OLED and Flexible Displays,” Proceedings of AM-FPD 10, July 5th - 7th, Tokyo, Japan, pages 1 - 4, 2010.
    5. P. Schalberger, M. Herrmann, S. Höhla, and N. Fruehauf, “A Fully Integrated 1” AMOLED Display Using Current Feedback Based on a Five Mask LTPS CMOS Process,” Proceedings of the SID 2010, pages 905-908 (May 2010), 2010.
    6. S. Höhla et al., “Full Color AM-LCDs on Flexible Glass Substrates,” Digest IDW’10, Paper FLX5/AMD4-4, pages 1689-1692 (December 2010), 2010.
    7. M. Strecker, A. Schindler, and N. Frühauf, “Carbon Nanotubes Deposited by Dielectrophoresis for Thin Film Transistors,” Proceedings of the Electronic Displays Conference 2010, Poster Presentations, ISBN 978-3-7723-1433-9 (March 2010), 2010.
  11. 2009

    1. T. Buergstein, P. Schalberger, S. Kohlenbecker, and N. Fruehauf, “Two Mask Top Gate TFT Process for AMOLED Display Process with Low Mask Count,” Eurodisplay 2009, Rome, Italy, Session 11.3, pp. 228-231 (September 2009), 2009.
    2. P. Schalberger, H. Baur, T. Bürgstein, and N. Fruehauf, “A Low Mask Count Top Gate Process for AMOLED Displays Based on Amorphous or Polymorphous Silicon,” Digest IDW’09, pp. 463-466, Paper OLED3/AMD3-2 (December 2009), 2009.
    3. A. Schindler, P. Schau, and N. Fruehauf, “Active-matrix and flexible liquid-crystal displays with carbon-nanotube pixel electrodes,” Journal of the SID, Vol. 17, Issue 10, pp. 853-860 (October 2009), 2009.
    4. E. Kurz and L. Rau, “Twisted Nematic Liquid Crystal Display with Aluminum Zinc Oxide Electrode,” 37th Topical Meeting on Liquid Crystals, 1. - 3. April 2009, Stuttgart, Session O8, 2009.
  12. 2008

    1. N. Fruehauf, “Active Matrix Technologies for AMOLEDs and Flexible Displays,” LatinDisplay, Session V, November 2008, Campinas, Brazil, pp. 49-53, 2008.
    2. E. Persidis, H. Baur, F. Pieralisi, P. Schalberger, and N. Fruehauf, “Area laser crystallized LTPS TFTs with implanted contacts for active matrix OLED displays,” Solid State Electronics, vol. 52, no. 3, March 2008, pp. 455-61. Publisher: Elsevier Science Ltd., UK., 2008.
    3. A. Schindler, A. Pross, H. Baur, and N. Fruehauf, “AMLCD with Carbon-Nanotube Pixel Electrodes,” SID 2008 International Symposium Los Angeles, Vol. XXXIX, Session 62.2, pp. 947-950, May 2008, 2008.
    4. A. Schindler, P. Schau, and N. Fruehauf, “Flexible Liquid Crystal Displays with Carbon Nanotube Pixel Electrodes,” International Display Research Conference, Session 7.3, November 2008, Orlando, Fl, pp. 90-93, 2008.
    5. N. Fruehauf, S. Goettling, S. Hergert, E. Persidis, P. Schalberger, and A. Schindler, “Thin-Film Transistor Technologies for Active Matrix OLED and Flexible Displays,” ITC 2008, Proceedings, Session 10, pp. 337-342, January 2008, Seoul, 2008.
    6. S. Goettling, B. Diehm, and N. Fruehauf, “Active Matrix OTFT Display With Anodized Gate Dielectric,” IEEE Journal of Display Technology, Vol. 4, Iss. 3, pp. 300-303 (September 2008), 2008.
    7. A. Schindler, S. Spiessberger, S. Hergert, N. Fruehauf, J. P. Novak, and Z. Yaniv, “Suspension-desposited carbon-nanotube networks for flexible active-matrix displays,” Journal of the SID, Vol. 16, Iss. 5, pp. 651-658 (May 2008), 2008.
  13. 2007

    1. P. Schalberger, E. Persidis, and N. Fruehauf, “A Five Mask CMOS LTPS Process with LDD and only one Ion Implantation Step,” Korean Journal for Information Display, Vol. 8, No. 1, 2007, Pages 1-5, 2007.
    2. S. Hergert, M. Kiesel, and N. Fruehauf, “Flexible Multi-Color Polymer-LED,” ASID 2007, August 2007, Singapore, Session OLED IV, ISBN: 978-981-05-8143-5, 2007.
    3. R. Hlawatsch et al., “Top-Emitting qVGA AMOLED Display With Integrated Row Driver Fabricated In LTPS Without Ion Doping,” Eurodisplay 2007, Moskow, Russia, Session 12.3, pp. 207-211, 2007.
    4. N. Fruehauf et al., “LTPS Processes for AMLCD and AMOLED Applications,” SID 2007 International Symposium Long Beach, Vol. XXXVIII, Session 7.1, May 2007, pp. 69-72, 2007.
    5. E. Persidis, S. Hergert, P. Schalberger, and N. Fruehauf, “An Active Matrix Process for Displays Utilizing Conventional or Inverted OLEDs,” Asia Display 2007, March 2007, Shanghai, China, Session 27-4, Pages 703-708, 2007.
    6. P. Schalberger, H. Baur, S. Kohlenbecker, E. Persidis, and N. Fruehauf, “High quality LTPS CMOS TFTs produced with a five mask process and only one ion implantation step,” ITC’07 in conjunction with SID-Mid Europe Chapter Spring Meeting, January 2007, Rom, Session 3.5, pages 52-55, 2007.
    7. S. Hergert, M. Linkor, M. Korny, and N. Fruehauf, “Process development and accurate low cost characterization for OLED sealants with a calcium test,” Journal of the SID, Vol. 15, Issue 6, pp. 421-429 (2007), 2007.
    8. A. Schindler, J. Brill, N. Fruehauf, J. P. Novak, and Z. Yaniv, “Solution-deposited carbon nanotube layers for flexible display applications,” Physica E, Issue 1-2, March 2007, Pages 119-123, 2007.
    9. F. Pieralisi, H. Baur, E. Persidis, N. Fruehauf, and et al., “External Compensation of LTPS AMOLED Displays based on a Three TFTs Pixel Circuit,” ITC’07 in conjunction with SID-Mid Europe Chapter Spring Meeting, January 2007, Rom, Session P.10, pages 162-165, 2007.
    10. O. Yaroshchuk et al., “Aging of Liquid Crystal Alignment on Plasma Beam Treated Substrates: Choice of Alignment Materials and Liquid Crystals,” Mol. Cryst. Liq. Cryst., Vol. 479, pp. 111–1201149-1158, 2007, 2007.
    11. A. Schindler, A. Lindner, S. Goettling, N. Fruehauf, J. P. Novak, and Z. Yaniv, “Solution-deposited carbon nanotube network TFTs on glass and flexible substrates,” ITC’07 in conjunction with SID-Mid Europe Chapter Spring Meeting, January 2007, Rom, Session 7.4, pages 304-307, 2007.
    12. E. Persidis, H. Baur, R. Hlawatsch, F. Pieralisi, P. Schalberger, and N. Fruehauf, “LTPS-TFT Process for AMOLED-Displays,” ITC’07 in conjunction with SID-Mid Europe Chapter Spring Meeting, January 2007, Rom, Session 8.2, Pages 322-325, 2007.
    13. N. Fruehauf, B. Diehm, S. Goettling, S. Hergert, E. Persidis, and A. Schindler, “Active Matrix Flat Panel Technologies,” Eurodisplay 2007, Moskow, Russia, Session 2.2, pp. 40-43, 2007.
    14. N. Fruehauf et al., “Innovative Thin Film Transistor Technologies for Flat Panel Displays,” Asia Display 2007, March 2007, Shanghai, China, Session 19-2, Pages 513-518, 2007.
    15. S. Hergert, M. Kiesel, S. Höhla, and N. Fruehauf, “PLED on Steel Foil with inorganic sputtered Hole-Injection Layer,” Eurodisplay 2007, Moskow, Russia, Session 2.3, pp. 44-47, 2007.
    16. E. Persidis et al., “Active-matrix OLED backplanes based on LTPS for small molecules and polymers,” Journal of the SID, Vol. 15, Issue 11, pp. 923-929 (2007), 2007.
    17. A. Schindler, S. Spiessberger, N. Fruehauf, J. P. Novak, and Z. Yaniv, “Solution-deposited Carbon Nanotube Network for Flexible Active Matrix Displays,” Asia Display 2007, March 2007, Shanghai, China, Session 33-4, Pages 882-887, 2007.
  14. 2006

    1. E. Persidis, H. Baur, F. Pieralisi, N. Fruehauf, and et al., “A p-channel LTPS active matrix process for OLED displays using a compensation circuit with three TFTs,” IMID/IDMC, August 2006, Daegu (Korea), Session 20-3, pp. 403-408, 2006.
    2. P. Schalberger, E. Persidis, and N. Fruehauf, “A five mask CMOS LTPS process with LDD and only one ion implantation step,” IMID/IDMC, August 2006, Daegu (Korea), Session 43-3, pp. 1645-1648, 2006.
    3. H. Baur, S. Jelting, N. Benson, and N. Fruehauf, “An LTPS active-matrix process with PECVD doped N+ drain/source areas,” Journal of the SID, February 2006, Vol. 14, Issue 2, pp. 119-126, 2006.
    4. H. Baur et al., “Active Matrix Technologies for AMLCD and AMOLED Application,” IMID/IDMC, August 2006, Daegu (Korea), Session 23-1, pp. 451-458, 2006.
    5. R.Schmidt, S. Göttling, D. Leusser, D.Stalke, A.Krause, and F. Würthner, “High soluble acenes as semiconductors for thin film transistors,” J. Mater. Chem. 16, 2006, pp. 3708-3714, 2006.
    6. S. Hergert, M. Korny, and N. Fruehauf, “Advanced Stabilized Calcium-Measurement-Setup for Rapid Testing of OLED Encapsulations,” IDRC, September 2006, Kent, Ohio (USA), Session 5.3, pp. 55-58, 2006.
  15. 2005

    1. J. Brill, S. Goettling, and E. M. Balbás, “Dielectrics for Organic Transistors with Low Threshold Voltage,” Organic Thin-Film Electronics, Mater. Res. Soc. Symp. Proc. 871E, Warrendale, PA, 2005, I9.6, 2005.
    2. H. Baur, S. Jelting, N. Benson, and N. Fruehauf, “Distinguished Student Paper: An LTPS Active-Matrix Process without Ion Doping,” SID 2005 International Symposium Boston, Vol. XXXVI, Book II, May 2005, pp. 1266-1269, 2005.
    3. H. Baur, S. Jelting, N. Benson, G. Feiler, D. Ferenci, and N. Fruehauf, “A Full-Color Quarter-VGA Poly-Si AMLCD Manufactured without Ion-Doping Technologies,” Eurodisplay 2005, Edinburgh, Session 19.1, pp. 496-499, 2005.
    4. C. Barron et al., “Development of Binem displays on flexible plastic substrates,” Journal of the SID 13/3, 2005, pp. 193-198, 2005.
    5. S. Goettling, J. Brill, N. Fruehauf, J. Pflaum, and E. M. Balbas, “Pentacene Organic Thin Film Transitors with anodized Gate dielectric,” SPIE Proc. Vol. 5940: Organic Field-Effect Transistors IV, 2005, pp. 594010-1 - 594010-9, 2005.
    6. O. Yaroshchuk et al., “Liquid Crystal alignment on the films deposited by sputtering deposition: dependence on target material and gaseous feed,” XIV International Symposium, Advanced Display Technologies, Oct. 2005, Crimea, Ukraine, 2005.
  16. 2004

    1. K. Diekmann et al., “Full Color Polymer OLED Displays,” ITG-Fachbericht 183, Proceedings Display and Vacuum Electronics, Garmisch-Partenkirchen, May 2004, pp. 101-106, 2004.
    2. N. Fruehauf, B. R. Chalamala, B. E. Gnade, and J. Jang(Editoren), “Flexible Electronics 2004 - Materials and Device Technology,” Sypm. Proc. Material Research Society, Volume 814, 2004, ISBN 1-55899-764-4, 2004.
    3. A. Rowinska-Scharzweller and N. Fruehauf, “Exact synthesis of dielectric thin film filters,” Proc. of SPIE Vol. 5527, Advances in Thin-Film Coatings for Optical Applications, Sept. 2004, pp. 12-23, 2004.
    4. C. Barron et al., “Development of Binem® Displays on Flexible Plastic Substrates,” Asia Display/IMID 04 Proc., August 24-27 in Daego, Korea, Session 16-2, 2004.
    5. J. Brill and N. Fruehauf, “State of the Art of Plastic Displays,” ITG-Fachbericht 183, Proceedings Display and Vacuum Electronics, Garmisch-Partenkirchen, May 2004, pp. 167-172, 2004.
  17. 2003

    1. M. Scheffel et al., “Emmission Characteristics of OLEDs on Planar and Non-Planar Surfaces,” MRS Symposium Proceedings Vol. 771 Organic and Polymeric Materials and Devices, pp. L7.31.1 - L7.31.6), Spring 2003, 2003.
    2. J. Specht, J.-P. Tahon, and N. Fruehauf, “A Full-Polymer Bistable Cholesteric Display,” The 23rd International Display Research Conference, Proc. pp. 192-195, Sept. 15-18, 2003, 2003.
    3. N. Fruehauf, “Design and Characterization of Liquid Crystal Light Modulators,” Proc. of SPIE Vol. 5144, Optical Measurement Systems for Industrial Inspection III, pp. 268-279, May 2003, 2003.
    4. N. Fruehauf, B. R. Chalamala, B. E. Gnade, and J. Jang(Editoren), “Flexible Electronics - Materials and Device Technology,” Sypm. Proc. Material Research Society, Volume 769, 2003, ISBN 1-55899-706-7, 2003.
  18. 2002

    1. J. Brill, E. Lüder, M. Randler, S. Vögele, and V. Frey, “A flexible ferroelectric liquid crystal display with improved mechanical stability for smart-card applications,” Journal of the SID 10/3, 2002, pp. 189-194, 2002.
    2. M. Wintermantel and A. Rowinska-Schwarzweller, “On Designing FIR Filter using Windows Based on Gegenbauer Polynominals,” ISCAS International Symposium on Circuits and Systems, Phoenix, 2002, Proc. pp I-412-I-416, 2002.
  19. 2001

    1. V. Frey, E. Lüder, M. Randler, J. Brill, and F. Pieralisi, “Ionic Effects in Ferroelectric Liquid Crystal Displays on Plastic Substrates and Addressing of FLCDs for Various Applications,” ITG-Fachbericht 165, Proceedings Displays and Vacuum Electronics, Garmisch-Partenkirchen, 2001, pp. 126-131, 2001.
    2. J. Ullmann and E. Lüder, “A reflective vertically aligned AMLCD for LCOS,” ITG-Fachbericht 165, Proceedings Displays and Vacuum Electronics, Garmisch-Partenkirchen, 2001, pp. 381-383, 2001.
    3. M. Randler, V. Frey, J. Brill, and E. Lüder, “Printed LCDs with Flexible Plastic Substrates and Laminated Cells,” ITG-Fachbericht 165, Proceedings Displays and Vacuum Electronics, Garmisch-Partenkirchen, 2001, pp. 121-125, 2001.
    4. J. Brill, M. Randler, V. Frey, and E. Lüder, “Layout and Mechanical Properties of a Bistable Smart Card Display,” ITG-Fachbericht 165, Proceedings Displays and Vacuum Electronics, Garmisch-Partenkirchen, 2001, pp. 133-136, 2001.
    5. J. Brill, E. Lüder, M. Randler, S. Vögele, and V. Frey, “A Flexible Ferroelectric Liquid Crystal Display with Improved Mechanical Stability for Smart Card Applications,” Asia Display/IDW ’01, Nagoya 2001, Proceedings pp. 81-84, 2001.